decor Archives - Page 5 of 5

Last night, after sulking all day about my crafting slump, I crawled in bed with my copy of Martha Stewart Encyclopedia of Crafts (best book ever). I think I am healed, I knew Martha would help! I remembered something I have been thinking about – of a Chevron Striped Plate. Let me explain, I have a plate collection on the walls of my dining room, they all mean something and they all have a story. I even have two plates from two of my great-grandmothers, one of which is handmade. I thought a modern looking Monogrammed Chevron Plate would really give the wall a fresh “springy” look.

Plate Wall

Supplies:

-plate

-paper for the monogram

-vinyl

-Mod Podge

-Silhouette (Cricut or an exacto knife)

I wanted to do a Chevron Stripe on the background of my plate but any graphic pattern would work. I, of course used my trusty Silhouette! First of all you need to clean your plate so the vinyl will stick. Measure the center of your plate making sure to measue the curves of the plate too. Mine was a little over 10″ so I made my chevrons 10.5″ long. In my Silhouette software I used the chevron shape (which was the free shape of the week a few days ago) and loaded my premium vinyl into the machine.

About the Monogram… did you know that you can search “free fonts” in google and there are millions of fonts that are way better than the stadard loaded on your compuer. All you do is downloard them to your computer, then install them and they will show up in all of your programs like Power Point, Word and your Silhouette Software! So, I searched for a free Monogram Font and found the perfect one. Here is the link. Make your last name inital larger than the other two initials because that will be the one in the middle. Load your bright colored cardstock and cut!

I have no scientific instuctions on how to place your vinyl, if you are a perfectionist I’m sure you could measure but that is just too hard for me. So I eye-balled it. Just make sure to get out all of the air bubbles.

Apply a thin layer of Mod Podge down on the plate. I didn’t Mod Podge the outer ring of the plate. I used the Matte finish because it’s my favorite.

Carefully place your letters down, make sure they are all pressed down well by using a pin or tweezers and get out the air bubbles.

Apply a top coat of Mode Podge to the inner curcle of the plate. Make sure to get in between all of spaces in the letters and again, pop the air bubbles with a pin because they will dry funky if you don’t.

Now just wait for your plate to dry, and hang that baby up, it looks so profesh!

I know, I know, this should be in pink and red… but its going in my bedroom and staying up all year so yellow and blue it is. You could actually write anything, I thought about our last name but I like the way “LOVE” looks. My favorite part of this project is actually the frame which my husband whipped up. I got the supplies and told him what to do (naturally, hehe) but he made the actual cuts so I will give him some credit. I think this project is so simple that I really didn’t even take any pics of the steps for a tutorial, just the final product.

My mom had some fence posts she was going to throw away so I kept a few because I liked that they were weathered looking. So Bryan cut them in half “lengthwise” and I gave him the dimensions and he made a very basic frame. (43 X 23)

I got a foam board from Hobby Lobby and cut it about a 1 in. smaller than the dimensions of the frame (42 X 22). Then, I painted the background yellow. When the yellow was dry, I stapled the foam board to the back of the Fence Frame.

I also picked up some chipboard letters from HobLob and some blue paper. You could paint the letters too but the paper is much cheaper than buying 4 different colors of paint. I just traced the letters onto the paper, cut them out and applied 1 coat of Mod Podge between the letter and the paper. Then I used 2 coats on top of the letters (drying 20 mins between). Glue the letters on to the foam board. (My husband walked in at this point and wanted me to measure the distance between the letters to make sure they were evenly spaced… poor Bryan forgot who he married)

Lastly, I got a picture hanging kit from Home Depot and screwed it in to hang my “work of art”.

This reminds me that I need to get to work on the Valentine’s Day banner that I have been dreaming up for my mantle. Lets see if it happens :) Have a great weekend!

Monogram Plate

Love Sign with a Fence Frame