Mod Podge Archives - TaylorMade

How to Save Your Leaves – Leaf Art

May 15, 2013 By Taylor 7 Comments

Last fall my Mom, Sister and I took a girls trip to the East Coast. It was on my Mom’s bucket list to see the leaves change and we came along for the ride :) Here in Texas we have no seasons… we have warm, hot, hotter, warm again then a series of cool fronts for a winter with mild days between. We were in awe with all of the colors and the history of the cities. The locals there told us we “were a week late” to see the really good colors- Of course we didn’t know that! To anyone who lives on the east coast and sees this every year- I think you take this for granted.

I wanted a way to “save” some leaves so I placed them away in a notebook and brought them home. My mom is going to start a gallery wall for her office so I though some leaf art from New England might be the perfect touch. I measured the frame and used craft paper cut the the right dimensions and taped it down.

Then I mod podged the back of the leaves and placed them on the craft paper where I wanted.

I pressed them down a little and then mod-podged the tops. Careful not to get it too thick outside of the leaf or it will dry darker.

Then I added a little trip reminder.

The Mod Podge makes the paper a little “rumply” so I stacked book on top after it dried.

Then frame it. The Mod Podge has sealed in the colors so far so hopefully they don’t fade too much.

So who all is from the East Coast and gets to live in this beauty… and who is with me on no seasons?

Mini Fabric Lamps

June 4, 2012 By Taylor 152 Comments

One of the very first things I ever “pinned” were these “Lamp Shades on a String” from Rebeccas DIY. They have been on my to-make list for months. When I first found this little project, it was only written in Swedish but I think she has an English version now. These are so cute and actually really fun to make, Finn even helped me a little :) I love a simple project, and one that uses scraps.What you need:Fabric Scraps, Lights, Mod Podge and Clear Cups

Then you need holes in your cups…

Iron all of your scraps and then start cutting. I have a template HERE if you are using the same cups (9oz Hefty Brand).You can also always find any of my templates under the “freebies” tab.

Cover your cups with the Mod Podge and wrap fabric around. The template is cut for a little excess fabric and I just used more Mod Podge on that little lip.

Let them dry…

Push the lights into the holes.

Here is a little PSA: I posted a project about a year ago that involved tealights in a metal container near plastic and some commenters thought I had a death wish or something. I thought “its just a tealight people” and obviously I am always around when I burn candles. I write a craft blog not a manual on life…but if this project isn’t for you, just don’t make it and as always please be safe :)

The best part… plug them in, yay!

Look where they live now

I love them, I want to make some for every single room. Stay tuned later this week for a very ModPodge-tastic giveaway that I know you will LOVE!!

Monogram Plate

March 24, 2011 By Taylor 42 Comments

Last night, after sulking all day about my crafting slump, I crawled in bed with my copy of Martha Stewart Encyclopedia of Crafts (best book ever). I think I am healed, I knew Martha would help! I remembered something I have been thinking about – of a Chevron Striped Plate. Let me explain, I have a plate collection on the walls of my dining room, they all mean something and they all have a story. I even have two plates from two of my great-grandmothers, one of which is handmade. I thought a modern looking Monogrammed Chevron Plate would really give the wall a fresh “springy” look.

Plate Wall

Supplies:

-plate

-paper for the monogram

-vinyl

-Mod Podge

-Silhouette (Cricut or an exacto knife)

I wanted to do a Chevron Stripe on the background of my plate but any graphic pattern would work. I, of course used my trusty Silhouette! First of all you need to clean your plate so the vinyl will stick. Measure the center of your plate making sure to measue the curves of the plate too. Mine was a little over 10″ so I made my chevrons 10.5″ long. In my Silhouette software I used the chevron shape (which was the free shape of the week a few days ago) and loaded my premium vinyl into the machine.

About the Monogram… did you know that you can search “free fonts” in google and there are millions of fonts that are way better than the stadard loaded on your compuer. All you do is downloard them to your computer, then install them and they will show up in all of your programs like Power Point, Word and your Silhouette Software! So, I searched for a free Monogram Font and found the perfect one. Here is the link. Make your last name inital larger than the other two initials because that will be the one in the middle. Load your bright colored cardstock and cut!

I have no scientific instuctions on how to place your vinyl, if you are a perfectionist I’m sure you could measure but that is just too hard for me. So I eye-balled it. Just make sure to get out all of the air bubbles.

Apply a thin layer of Mod Podge down on the plate. I didn’t Mod Podge the outer ring of the plate. I used the Matte finish because it’s my favorite.

Carefully place your letters down, make sure they are all pressed down well by using a pin or tweezers and get out the air bubbles.

Apply a top coat of Mode Podge to the inner curcle of the plate. Make sure to get in between all of spaces in the letters and again, pop the air bubbles with a pin because they will dry funky if you don’t.

Now just wait for your plate to dry, and hang that baby up, it looks so profesh!

Love Sign with a Fence Frame

January 21, 2011 By Taylor 7 Comments

I know, I know, this should be in pink and red… but its going in my bedroom and staying up all year so yellow and blue it is. You could actually write anything, I thought about our last name but I like the way “LOVE” looks. My favorite part of this project is actually the frame which my husband whipped up. I got the supplies and told him what to do (naturally, hehe) but he made the actual cuts so I will give him some credit. I think this project is so simple that I really didn’t even take any pics of the steps for a tutorial, just the final product.

My mom had some fence posts she was going to throw away so I kept a few because I liked that they were weathered looking. So Bryan cut them in half “lengthwise” and I gave him the dimensions and he made a very basic frame. (43 X 23)

I got a foam board from Hobby Lobby and cut it about a 1 in. smaller than the dimensions of the frame (42 X 22). Then, I painted the background yellow. When the yellow was dry, I stapled the foam board to the back of the Fence Frame.

I also picked up some chipboard letters from HobLob and some blue paper. You could paint the letters too but the paper is much cheaper than buying 4 different colors of paint. I just traced the letters onto the paper, cut them out and applied 1 coat of Mod Podge between the letter and the paper. Then I used 2 coats on top of the letters (drying 20 mins between). Glue the letters on to the foam board. (My husband walked in at this point and wanted me to measure the distance between the letters to make sure they were evenly spaced… poor Bryan forgot who he married)

Lastly, I got a picture hanging kit from Home Depot and screwed it in to hang my “work of art”.

This reminds me that I need to get to work on the Valentine’s Day banner that I have been dreaming up for my mantle. Lets see if it happens :) Have a great weekend!